Formula TECH SUSPENSION TJ3 Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria rowerowe Formula TECH SUSPENSION TJ3. Formula TECH SUSPENSION TJ3 14 stron. Shock absorber

Drukuj stronę

Shock Absorber Characteristic

Rebound Control

1. All TJ Shock Absorbers allow controlling the rebound thanks to a knob on the shock absorber's head. The knob

allows for a regulation of up to 24 "clicks" settings;

Do not use the 2,5 mm hex key to control the rebound: only use the knob. Controlling the rebound by using the

knob's screw could cause malfunctions. If it's impossible to control the rebound manually with the knob, it must be

disassembled with a 2,5 mm hex key and the rebound control must be performed with a 6 mm hex key.

2. This adjustment affects the 2nd phase of the shock absorber which happens after the compression phase. The

extension range is strictly related to the stiffness of the spring used (N/mm): a spring with a higher stiffness has a

higher restoring force, consequentially the shock absorber will require a higher hydraulic force;

3. In order to increase the rebound, rotate the knob CLOCKWISE (+);

4. The higher the stiffness, the faster the rebound for the same amount of "clicks". For example, moving from a

spring with 68,7 Nm to one with 73,6 N/mm, to obtain the same rebound it's necessary to rotate clockwise the

know by one or two clicks. Vice-versa for springs with lower stiffness.

It's not always possible to control the rebound. Get in touch with a specialized technician before working on the

bike and disassemble the shock absorber to avoid activities that could compromise its proper function.

-End of Procedure-