Andatech AlcoSense PRO Podręcznik użytkownika - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt testowy Andatech AlcoSense PRO. Andatech AlcoSense PRO 9 stron. Personal breathalyser
Drukuj stronę
Fast Mode Operation
Test will be quicker and more convenient for mass testing, but results will be given
in BAC ranges, rather than a numerical reading.
Step 1:
With the unit switched off, press and hold the Power Switch.
Step 2:
Release the Power Switch when displaying
counts down from
Step 3:
The unit will beep twice and display
and it is ready for you to start.
Step 4:
Begin blowing into the unit for about 1-2 seconds or until the unit beeps
twice. You will see the unit displaying digit
analysing the sample.
After analysis is complete, you will see the
blood alcohol concentration BAC ranges
results displayed. The result will be displayed
for 1 second before it is ready for another test.
How to clean breathalyser mouthpieces
WHEN:
For personal use, the mouthpieces are reusable if cleaned properly. For
hygiene reasons, replacement is recommended after every 3 months of
use. To reorder, contact your retailer, or call us on 1300 800 200.
HOW:
1. Remove the mouthpiece from breathalyser.
2. Put the mouthpiece in hot water for 2 minutes.
3. Wipe thoroughly and dry the mouthpiece before use.
Limits
AUSTRALIAN BLOOD ALCOHOL LIMITS: Adult License 0.05%
Some drivers are restricted to lower levels of BAC. Please refer to your local transport
authority for your correct limit. If in any doubt do not drink and drive.
The safest level when driving is none at all. Alcohol impairs your judgement and can make
you drowsy or sleepy.
to warm up.
to indicate fast mode operation
and wait while the unit
moving left to right as it is
0.00% to 0.01%
0.02% to 0.04%
0.05% and over