Andatech ALX3000 Podręcznik użytkownika - Strona 15
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt testowy Andatech ALX3000. Andatech ALX3000 20 stron. Ignition interlock
Drukuj stronę
SPECIFICATIONS
Measurement Range
Operation Temperature and
Storage Information
Calibration
Power Input
Warm Up Time
Current consumption
Calibration
Operation Voltage
Weight
Dimensions (mm)
Warranty
ALX3000 INSTALLATION
Checkpoints before installation:
1. Check if the vehicle manufacturer requires any actions before the power is turned off.
2. Check the vehicle battery and its "best before date" to ensure proper Ignition Locking device
function.
3. Switch off the battery current during installation.
Step by step:
1. Placement of the control box
• The control box must be placed in a dry and protected place of the interior space.
2. Placement of the handset
• Place the handset close to the driver's seat so that information may be easily viewed.
• The placement should be outside the car's impact zones (e.g. areas which would affect the
operation of airbags, or pose a danger in the event of a collision).
• The position shall be away from heat/cold, dirt and moisture.
• You may choose to use the magnetic car holder to secure the handset for safe handling of
functions.
up to 2.50 mg/L
*Note: may differ according to different country legislations.
Operation and storage temperature: -40°C - 85°C
Humidity: 20% - 98%
600-1100h Pa
The conditions above do not affect the measurement results
Every 1 year
DC 12V~24V
Minimum: 3 seconds Maximum: 2 minutes
Maximum current consumption < 1.2A
Standby current < 5Ma
Every 1 year
DC 12 ~ 24v
Handset: 135g
Control Box: 650g
146 x 60 x 28 mm
1 Year
15