Andatech ALX3000 Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt testowy Andatech ALX3000. Andatech ALX3000 20 stron. Ignition interlock

EMERGENCY BYPASS

BYPASS: You can start the vehicle without an emergency breath test.

In the event of an emergency, you may override the device with an emergency code that is given

to the person in charge of the vehicle during installation. The codes are single use, and the device

must be taken to an authorised service centre within 72 hours of activating the override.

If the override function is used, please note the time of override as indicated on the device. If you

have not contacted Andatech within the period of 72 hours for instruction, the vehicle may be

permanently locked from starting the ignition until the interlock is removed. The car would then be

required to be *towed to the closest service center.

*Extra costs will be involved for towing services

Immobilisation may be bypassed as follows:

* To enter the override PIN code, access the device's menu, select the access code, enter the code

within the "enter code" option, check the "contact and service center" name in "service.no" in the

access code and visit the service center within 72 hours.

Service requirement:

ALX3000 shall be serviced and calibrated every 12 months, starting from the first installation. This

requirement may vary depending on the country's legal standard or equivalent.

Service indication:

1. The service cycle of the ALX3000 is 365 days.

2. The number of remaining days is indicated by the next calibration date and service date in

ALX3000 information.

3. If the service date is less than 7 days, a warning message will be displayed on the device.

Maintenance:

Service and calibration of the ALX3000 may only be carried out by certified service centers. The

ALX3000 shall be serviced and calibrated within an interval of 12 months from the first installation.

Do not clean the instrument with any liquids. Use only a dry cloth.

Dismounting:

Removal of ALX3000 should be performed by a certified service center to ensure the operation of

the vehicle.