Carmanah MX Series Instrukcja instalacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Panel słoneczny Carmanah MX Series. Carmanah MX Series 20 stron. Radar detection kit
Również dla Carmanah MX Series: Instrukcja instalacji (2 strony), Instrukcja instalacji (2 strony), Instrukcja wymiany (4 strony), Instrukcja wymiany (2 strony), Instrukcja wymiany (4 strony), Instrukcja wymiany (2 strony)

3.4

Drill Holes for Radar Cable and Mount Through Bolts

If routing the radar cable inside the pole, drill a 5/8" hole in the center of where the radar mount will attach to the

pole. If through-bolting the radar mount, drill two 7/16" holes above and below as shown, through both sides of the

pole.

3.5

Fish Radar Cable, Install Radar & Mount to Pole

Install the radar module into the mount saddle with the cable facing down and fasten with the supplied spacers,

washers and screws as shown. Fish the radar cable through the mount, into the pole and up or down to the

Carmanah MX system. Bolt or band the radar mount to the pole.

Install the radar module with its cable facing down to optimize both detection range and

resistance to water ingress.

Pole mount to pole hardware not supplied.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

RADAR DETECTION KIT INSTALL GUIDE

carmanah.com

LEVEL 4