Formula Air RS-EXL Podręcznik konserwacji - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik konserwacji dla Jednostka sterująca Formula Air RS-EXL. Formula Air RS-EXL 15 stron. Ex rotary valve

6.3.

Storage

Until mounting is commenced, an Ex rotary valve must be stored under conditions that prevent

rusting, corrosion, decomposition and deformations, or another kind of storage, which can lead

to risk of malfunction.

7. MOUNTING

An Ex rotary valve must not be started until it has been mechanically connected on both

sides.

The Ex rotary valve must be sealed on both sides of the hole series and bolted in the

predrilled holes with M8 bolts.

Important: Always wear the safety equipment required.

7.1.

Electrical connection

Electrical connection must only be carried out by a certified electrician.

In relation to electrical connection, the rotating direction

of the rotary valve must be checked. The rotating

direction is indicated by the arrow on the coupling

housing.

The electrical connection must be carried out in accordance with

current national regulation.

7.2.

Electrostatic bond

Electrostatic bonding of an Ex rotary valve must be carried out

before commissioning

8. OPERATION / MAINTENANCE

If there is any doubt whether an Ex rotary valve or any important

hereof is intact until next overhaul, replacement must always be

carried out.

Important: Always wear the safety equipment required.

The national safety rules in force must be observed.

8.1.

Periodic maintenance

In order for the Ex type approval to be guaranteed by the manufacturer, maintenance must

be carried out by the manufacturer or a distributor appointed by the manufacturer.

Maintenance must always be in compliance with the directions in the manual.

parts