ATI Technologies P100S Instrukcja obsługi i konserwacji - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Wzmacniacz ATI Technologies P100S. ATI Technologies P100S 6 stron. Stereo turntable amplifier

Drukuj stronę

TECHNICAL SPECIFICATIONS

INPUT IMPEDANCE

INPUT LEVEL

OUTPUT LEVEL

OUTPUT IMPEDANCE

GAIN

SLEW RATE

CHANNEL SEPARATION

SUBSONIC (RUMBLE) FILTER

NOISE PERFORMANCE

HARMONIC DISTORTION

INTERMODULATION DISTORTION

FREQUENCY REPONSE

POWER REQUIREMENT

CONNECTORS

DIMENSIONS

Jumper programmable, 50 to 100 ohms

47 to 394 pf in 47 pf steps.

250 mVrms maximum @ 1 KHz

5 mV nominal @ 1 KHz for+4 dBm out.

+18 dBm into 600 ohms, balanced or

unbalanced, 10 Vrms single ended into high Z

load.

400 ohms balanced, 200 ohms single ended,

split and RF bypassed.

54 db maximum, continuously adjustable.

13 V/uSec. Assures minimum TIM.

80 db or better.

Two pole active input filter, Flat to 30 Hz, -6

@ 20 Hz, -18 @ 10 Hz, -30 db @ 5 Hz in

addition to RIAA specified roll off.

S/N=80db min, ref 10mV, 1KHz, Unweighted

over 20KHz measurement band with input

terminated in 600 ohms. S/N=90 db min, ref

10 mV, 1KHz, with A weighting filter, 600

ohm input term.

.10% max. THD, 20-20000 Hz @ +18 dBm.

.05% maximum, SMPTE measurement.

+.5db, 30 to 20,000 Hz ref. Old or new RIAA

curve, either curve available by jumper

change.

115 or 230 VAC, int. jumper select, 50/60 Hz

@ 6VA. 3 cond. RF filtered.

Input – RCA type phono jacks Output – Screw

terminal block, 3/8 ctrs.

9 ¼ L x 5 3/8 W x 1 5/8 H, 5 lbs. Ship

audio.com