ANDELI TIG-250PL ACDC Instrukcja obsługi - Strona 17
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Falownik ANDELI TIG-250PL ACDC. ANDELI TIG-250PL ACDC 20 stron. Inverter ac/dc pulsed tig welder
Drukuj stronę
INSTALLATION AND ADJUSTMENT
Overview
The key feature of the control panel is the logical way in which the controls are arranged. All the
main
parameters needed for day-to-day working can easily be
-selected with the keys
-altered with the adjusting dial
-shown on the display during welding.
The illustration below shows an overview of the main settings needed for day-to-day working,
using the
TIG-250PL control panel as an example. You will find a detailed description of these settings in
the following section.
(1) AC/DC selecting key
AC welding
DC welding
(2) Mode selecting key
2-step mode
COLD mode
(3) Gas-test key
Lights up when Gas-test key is pressed, after that gas will flow out for 15s. Press the key again to
stop the
gas flow before the 15s are up.
(4) The program to save
Press this button to save the program you want after setting it, and then use it next time.
(5) Pulse key
Lights up when Pulse key is pressed, Pulse has been selected.
(6) and (7) Parameter selection keys
If "2T mode" has been selected, it is possible to change parameter indicator by means of the
parameter
selection keys (6) and (7) while the welding operation in progress.
(8) Adjusting dial
If the parameter indicator lights up, then the selected parameter can be altered on adjusting dial.
15