Formula Sound PM-100 Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Mikser Formula Sound PM-100. Formula Sound PM-100 12 stron. Modular production

PM - 100 UNIVERSAL INPUT MODULE

Internal Settings

Jumper links are used to select and

change functions.

1-5 uses 3 pin headers and the link

should join the centre pin to one of the

end pins.

6. Two pairs of pins - the link joins one

pair of pins. The various link positions are

also shown on the PCB.

If you are changing link positions

ensure they are seated correctly and

all necessary links have been moved

1. 1 Jumper link. The position selects

input B to microphone or stereo line input

(in the microphone position the Xfade

select switches are disabled.)

2. 2 Jumper links . The positions select

input A to be a Magnetic phono cartridge

equalised to RIAA or a normal flat

response line input. Move both links.

3. 4 Jumper links . The positions select

equalisation on or off (i.e. tone controls

disabled). It is vital that all four jumpers

are moved.

4. 2 pair of jumper links select Aux1

and Aux2 to be pre or post fader. (i.e. if

the selected aux function is affected by

the channel fader.) Move 2 links for AUX1

and 2 links for Aux2.

E.G. an auxiliary set up for use as an

echo send on a microphone channel

would normally be set to post, so if the

fader is closed no signal would be sent

to the echo system.

If the auxiliary function was in use as a

foldback or monitoring feed it would

normally be set to pre fader.

Aux sends can be used for many tasks.

5. 1 Jumper link selects Phantom power

on or off for microphone channels.

6. 1 Jumper link The position of this link

determines if the channel mute button is

enabled or disabled.