Advanced Kiosks Island Kiosk Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Terminale dotykowe Advanced Kiosks Island Kiosk. Advanced Kiosks Island Kiosk 18 stron.

The rods that are used in this particular kiosk assembly are 1.1 inch in diameter. According to

this article at https://support.esigns.com/kb/a121/pole-pockets-sleeves-on-banners.aspx, for this

assembly you will need to make sure to have a 3" flat pocket size for a 1.1" diameter pole.

This will need to be included as part of the 30-inch length of the banner. Speak to your banner

manufacturer to ensure that the dimensions will be correct.

Mounting to the Kiosk

The top banner pole requires a Philips screwdriver to attach it to the center mast.. The mast will

be mounted by putting it through the hole in the top of the kiosk and securing it to the bottom

frame.

After the mast has been secured, you can then slide the banner over the top and bottom poles of

the mast. As mentioned before, check with your banner manufacturer to make sure that

this banner will fit. The caps on the end of the poles will keep the banner from sliding off the

ends.

Revision 2/12/2021

Page 10 of 16

Island Kiosk Assembly and Operation Instructions