Dreamland RELAXWELL Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Grzałka Dreamland RELAXWELL. Dreamland RELAXWELL 8 stron. Heated throw

off. The standby light

indicate that the product has switched off automatically.

• To switch the heated cushion back on, press the ON/OFF switch twice (4), and select

your continuous use temperature by pressing the temperature selector (3), and chose

between 1 - 3.

SWITCH-OFF

• Switch the heatpad off by pressing the ON/OFF

• Remove the plug from the socket.

The heated cushion + cover are washable. The washing symbols are also on the heatpad care label.

WARNING! Always disconnect the appliance from the mains

supply before cleaning or performing maintenance.

MACHINE WASHING

•

The heatpad can be machine washed at 30°C with a normal cycle.

•

Only the gentle spin cycle is to be used. DO NOT use an extra spin cycle.

MACHINE WASHING

•

The fur cover and the cushion can be machine washed at 40°C with a normal cycle.

•

Only the gentle spin cycle is to be used. DO NOT use an extra spin cycle.

DRYING

•

Set the dryer at a low temperature.

•

DO NOT apply pegs on the electrical parts when hanging the heatpad outside to dry so not to

damage it.

•

DO NOT use the heatpad until it is completely dry.

DO NOT dry-clean

DO NOT bleach

DO NOT iron

WARNING! Hang the heatpad without using pegs on the wired

area so as not to cause any damage to it.

The product is packaged in recyclable materials. Dispose of it in compliance with the

environmental protection standards.

In accordance with the "Implementation of Directive 2012/19/EU on waste electrical and

electronic equipment (WEEE)", the crossed bin symbol on the appliance or its packaging

indicates that the product must be disposed of separately from other waste at the end of its

useful life.

The user must therefore take the appliance to an appropriate recycling centre for electrical and electronic

(2) (Diagram [B]), will be blue, after the 3 hours has elapsed, to

CLEANING AND MAINTENANCE

DISPOSAL

switch (4) (Diagram [B]).