Bosch Professional GSB-20-2 Oryginalna instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Oryginalna instrukcja obsługi dla Elektronarzędzie Bosch Professional GSB-20-2. Bosch Professional GSB-20-2 42 stron. Gsb professional
Również dla Bosch Professional GSB-20-2: Instrukcja obsługi (11 strony), Oryginalna instrukcja obsługi (15 strony)
Drukuj stronę
A)
(15) Chuck key
A)
(16) Keyed chuck
A)
(17) Screwdriver bit
A)
(18) Universal bit holder
Technical data
Impact drill
Article number
Rated power input
Power output
No-load speed
– 1st gear
– 2nd gear
Rated speed
– 1st gear
– 2nd gear
Impact rate
Rated torque
– 1st gear
– 2nd gear
Spindle collar diameter
Speed preselection
Right/left rotation
Keyed chuck
Keyless chuck
Max. drilling diameter (1st/2nd gear)
– Masonry
– Concrete
– Steel
– Wood
Chucking capacity
Weight according to EPTA-Proced-
ure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Assembly
Pull the plug out of the socket before carrying out any
u
work on the power tool.
Auxiliary Handle (see figure A)
Do not operate your power tool without the auxiliary
u
handle (12).
Before any work, make sure that the wing bolt (11) is
u
tightened. Loss of control can cause personal injury.
Bosch Power Tools
(19) Hex key
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
B) Commercially available (not included in the scope of deliv-
ery)
GSB 20-2
3 601 AA2 0..
W
800
W
420
rpm
1100
rpm
3000
rpm
740
rpm
1930
rpm
48,000
Nm
4.8
Nm
1.8
mm
43
–
–
●
–
mm
20/16
mm
20/16
mm
13/6
mm
40/25
mm
1.5–13
kg
2.6
/ II
You can adjust the auxiliary handle (12) to any of 12 posi-
tions in order to achieve a safe work posture that minimises
fatigue.
Turn the wing bolt (11) anti-clockwise and guide the auxili-
ary handle (12) in the required position over the drill chuck
onto the spindle collar of the power tool.
Setting the Drilling Depth (see figure A)
You can use the depth stop (13) to set the required drilling
depth X.
Press the button for depth stop adjustment (10) and insert
the depth stop into the auxiliary handle (12).
B)
GSB 20-2 RE
GSB 20-2 RE
3 601 AA2 1..
3 601 AA2 2..
800
420
0–1100
0–3000
0–740
0–1930
48,000
4.8
1.8
43
●
●
●
–
20/16
20/16
13/6
40/25
1.5–13
2.6
/ II
1 609 92A 4H5 | (28.08.2018)
English | 7
800
420
0–1100
0–3000
0–740
0–1930
48,000
4.8
1.8
43
●
●
–
●
20/16
20/16
13/6
40/25
1.5–13
2.6
/ II