ATI Technologies BQ2208 Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Podgrzewacz wody ATI Technologies BQ2208. ATI Technologies BQ2208 8 stron. Marine water heater with dual heating
Drukuj stronę
GENERAL INFORMATION AND FEATURES
This water heater has been designed and produced to ensure long and trouble free operation for many years. Every
single water heater is individually pressure tested prior to delivery.
1. GENERAL PRECAUTIONS IMPORTANT SAFETY
To reduce the risk of fire, electric shock, or injury when using the appliance, carefully follow these basic precautions:
Read all instructions before installing and using the appliance. This manual is an integral and essential part of the
device: it must be kept on hand for future reference.
Use the water heater in the applications described in this manual. Do not use this device for other types of operations
The installation must be performed by a qualified person who is responsible for the implementation of existing
security standards. Improper installation, caused by failure to follow the manufacturer's instructions, may cause injury
to persons, animals or damage to other equipment for which the manufacturer assumes no responsibility
The appliance must not be installed in environments with excessive presence of water and must be protected from
splashing water, jets of water or other liquids, in order to avoid short circuits.
This device is not intended for use by persons (including children) with reduced physical sensory or mental
capabilities, or lack of experience and knowledge, unless they are given supervision or instruction for use of the
appliance by a person responsible for their safety.
Children being supervised not to play with the appliance.
Do not clean appliance parts with flammable fluids and do not store or use gasoline or other flammable vapors and
liquids in the vicinity of this. Gases and vapours can create a fire hazard or explosion.
The packaging material (plastic bags, foam, clips, etc.) must be kept away from children, because they can be
dangerous.
If the appliance is sold to another owner, make sure that this booklet stays with the appliance so that the new owner
and / or installer can consult it
2. SPECIFICATIONS
P/N
BQ2205
BOAT BOILER BQ 22 lt - 550 W -
230 V
BQ2208
BOAT BOILER BQ 22 lt - 850 W -
230 V
BQ2212
BOAT BOILER BQ 22 lt - 1250 W -
230 V
BQ2205E
BOAT BOILER BQ 22 lt - 550 W -
230 V - no coil
BQ2208E
BOAT BOILER BQ 22 lt - 850 W -
230 V - no coil
BQ2212E
BOAT BOILER BQ 22 lt - 1250 W -
230 V - no coil
3. PACKAGING
The device is packaged and delivered in a cardboard box with adequate protection. In addition the apparatus, inside the box
is present the installation manual.
4. DIMENSIONS (FIG_04-1)
5. CONSTRUCTION DESCRIPTION AND OPERATION
The purpose of this device is to heat the sanitary hot water in two different ways (see FIG_5-1 for mod. BQ22XX, FIG_5-2
for mod. BQ22XXE):
A. Through the heat exchanger (only model BQ22XX) between the engine cooling water and the water
stored in the tank. Such heat exchange is possible thanks to a heat exchanger. The engine cooling water
circulates through a coil placed at the center of the tank to spread the heat evenly.
B. By means of an electric resistance (supplied as standard with the appliance).
supply
V~
230
230
230
230
230
230
A
B
mm (")
mm (")
320 (12,6) 320 (12,6) 410 (16,1) 460 (18,1) 523 (20,6)
power
power
capacity
A
w
lt (gal)
2,4
550
22 (5,8)
3,7
850
22 (5,8)
5,4
1250
22 (5,8)
2,4
550
23 (6,0)
3,7
850
23 (6,0)
5,4
1250
23 (6,0)
C
D
mm (")
mm (")
mm (")
ENGLISH
max
weight
pressure
empty
kPa (psi)
Kg (lb)
700 (102)
14 (31)
700 (102)
14 (31)
700 (102)
14 (31)
700 (102)
12 (27)
700 (102)
12 (27)
700 (102)
12 (27)
E
210-0346 – edizione 2018-12
p. 3/8
weight
filled
Kg (lb)
36 (79)
36 (79)
36 (79)
34 (75)
34 (75)
34 (75)