Andersen 82-3ST Instrukcja obsługi produktu - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi produktu dla Wyciągarki Andersen 82-3ST. Andersen 82-3ST 12 stron.

OPERATION CHECKS

Check manual operation of the winch

First check the winch by rotating the drum by hand. Then use a winch handle to operate the

winch manually, turning the handle in both directions with no load on the drum. The winch

should operate smoothly in both gears, always with the drum rotating only in a clockwise

direction.

For normal operation start by using the winch in 1

in a clockwise direction. As load increases and operation becomes more difficult, shift into 2

gear by turning the handle in the opposite direction so that you can continue to operate the

winch comfortably.

At low loads, reversing the direction of handle rotation from 2



clockwise again will return the winch to 1

At higher loads, the winch will automatically shift so that reversing direction of handle



rotation from 2

continued operation under high load.

Note: The winch will only shift gear automatically to allow operation in 3

been reached while operating in 2

handle in second gear until there is sufficient resistance to trigger the shift.

gear to clockwise again will put the winch into 3

gear. You may manually assist this transition by turning the

gear (highest speed) by turning the handle

gear operation.

gear and turning

gear, allowing

gear if sufficient load has