Electrolux E32AF85PQSA Instrukcja obsługi i konserwacji - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Zamrażarka Electrolux E32AF85PQSA. Electrolux E32AF85PQSA 23 stron.

Drukuj stronę
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
Pure Advantage
TM
Air
Filter
Your new Pure Advantage
TM
air filter is
........................................................
located inside one of the 2-Liter Door
..................................................
Bins, The air filter cover is located on
..........................................
the upper right side of the control box,
In general, you should change the air
filter with Part Number "EAFCBF" every
6 months to ensure optimal filtering of
freezer odors. The replacement air filter
,
can be purchased on the Electrolux ICON
,
website (http://www.electroluxicon.com)
!!!!!!!!!!!!!!!!!!!!!
or call toll free in the U,S, and Canada:
1-877-4ELEOTROLUX
(1-877-435-3287).
........................................................................
Your electronic control is equipped with a
ii!
..................................................................
Change Filter Indicator to remind you to
change your filter, See "Replace Air Filter",
iiiii!
To Install
Or Replace
The
Air
Filter
Pull down on the front of the Pure
Advantage
TM
air filter cover. This
releases the hinged bottom cover to
drop open.
Remove the old filter and discard it.
Unpackage the new filter and place it
inside the hinged bottom cover of the
housing.
Push the hinged bottom cover
upward until the tab snaps into
closed position.
Open air filter cover
Theater
TM
LED Lighting
The interior cabinet lighting features LED
lights that gradually ramp up in intensity
after the door is opened.
To replace
an LED:
1,
Unplug the electrical cord or switch
OFF the power supply breaker.
2,
Push down on the LED cover and then
pull away from the cabinet interior.
3,
From the inside of the LED cover,
remove the wire harness connector
by pressing on the latch with a small
flat-bladed screwdriver. Pull the wire
harness connector out of the LED.
4,
Replace with a new LED and install in
the reverse order,
Remove air filter