Andersen A1 Instrukcja instalacji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe Andersen A1. Andersen A1 14 stron.
Drukuj stronęA N D E R S E N
A 1 I N S T A L L A T I O N G U I D E
2.2.3
Feed the mains supply cable 2-M
through the selected hole on the
back panel.
2.2.4
Feed the mains supply cable
through the cable gland entry 2-1-3
and wire to the three terminals, L, N,
E as shown in fig F4.3. Ensure the
clamping screws are tight and the
cable gland is tight and sealed.
2.2.5
Carry out normal wiring safety
checks. Note the metal cabinet of
the Andersen A1 is NOT earthed.
2.2.6
Replace the RCD front panel.
2.2.7
Replace the RCD assembly if it was
removed for wiring.
2.2.8
Open the RCD door 2-1-2 to re
expose the RCD 2-1-5
2.2.9
Ensure that the RCD is still switched
OFF.
2.2.10
Ensure that the supply protective
cover 2-1-7 is in place. fig F7.1
2.2.11
Turn on the mains supply.
2.2.12
Turn the RCD ON using switch 2-S
and ensure that it stays ON fig F4.3
2.2.13
Push the RCD test button 2-T and
ensure that the RCD turns OFF fig
F4.3
2.2.14
Repeat the previous 2 items one
more time.
2.2.15
Leave the RCD turned OFF and
turn OFF the mains supply at the
consumer unit.
2.2.16
Close the RCD opening door.
Fig F4.3
2-S
2-T
2-1-1
2-1-2
2-CS
E
N
L
2-1-5
A
A N D E R S E N
2-1
2-0
2-1-5
x4
PAGE 7
2-M
2-1-4
2-1-3