Bosch Instructions for Use Instrukcja instalacji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Suszarka Bosch Instructions for Use. Bosch Instructions for Use 12 stron. 24" compact condensation dryer axxis - white
Również dla Bosch Instructions for Use: Instrukcja instalacji i obsługi (32 strony), Instrukcja instalacji i obsługi (32 strony), Instrukcja obsługi (10 strony), Instrukcja obsługi (10 strony), Instrukcja obsługi (8 strony), Instrukcja obsługi (10 strony), Instrukcja obsługi (8 strony), Instrukcja instalacji i użytkowania (8 strony), Instrukcja obsługi (8 strony), Instrukcja obsługi (8 strony), Instrukcja obsługi, konserwacji i instalacji (24 strony), Instrukcja obsługi (10 strony), Instrukcja obsługi (8 strony), Instrukcja obsługi, konserwacji i instalacji (24 strony), Instrukcja obsługi i instalacji (29 strony), Instrukcja obsługi (10 strony), Instrukcja obsługi (10 strony), Instrukcja obsługi (8 strony)

Drukuj stronę
Bosch Instructions for Use Instrukcja instalacji

Operating the appliance

These instructions apply to several appliance variants. It is
possible that individual features are described which do not
apply to your appliance.
Note: Switch on the extractor hood when you start cooking and
switch it off again several minutes after you have finished
cooking. This is the most effective way of removing the kitchen
fumes.
Control panel
Explanation
A
Light On/Off
0.1
Fan Off/Fan speed 1
2
Fan speed 2
3
Fan speed 3

Cleaning and maintenance

:
Risk of burns!
The appliance will become hot during operation, especially
near the bulbs. Allow the appliance to cool down before
:
cleaning.
Risk of electric shock!
Penetrating moisture may result in an electric shock. Clean the
appliance using a damp cloth only. Before cleaning, pull out the
mains plug or switch off the circuit breaker in the fuse box.
:
Risk of electric shock!
Penetrating moisture may cause an electric shock. Do not use
any high-pressure cleaners or steam cleaners.
:
Risk of injury!
Components inside the appliance may have sharp edges. Wear
protective gloves.
Cleaning agents
Observe the information in the table to ensure that the different
surfaces are not damaged by using the wrong type of cleaning
agent. Do not use
harsh or abrasive cleaning agents,
■
cleaning agents with a high concentration of alcohol,
■
hard scouring pads or sponges,
■
high-pressure cleaners or steam cleaners.
■
Wash new sponge cloths thoroughly before use.
Follow all instructions and warnings included with the cleaning
agents.
Setting the fan
Switching on
Press button 1, 2 or 3.
Switching off
Press the 0 button.

Lighting

The lighting can be switched on and off independently of the
ventilation.
A
Press the
button.
Area
Cleaning agents
Stainless steel
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth.
Clean stainless steel surfaces in the
direction of the grain only.
Special stainless steel cleaning prod-
ucts are available from our after-sales
service or from specialist retailers.
Apply a very thin layer of the cleaning
product with a soft cloth.
Painted surfaces
Hot soapy water:
Clean using a damp dish cloth and
dry with a soft cloth/towel.
Do not use any stainless steel clean-
ers.
Aluminium and
Glass cleaner:
plastic
Clean with a soft cloth.
Glass
Glass cleaner:
Clean with a soft cloth. Do not use a
glass scraper.
Operating controls Hot soapy water:
Clean using a damp dish cloth and
dry with a soft cloth.
Risk of damage to the electronics
from penetrating moisture. Never
clean operator controls with a wet
cloth.
Do not use any stainless steel clean-
ers.
5