Community Distributed Design DS5 Instrukcja instalacji i obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Głośniki Community Distributed Design DS5. Community Distributed Design DS5 12 stron. Distributed design series surface mount loudspeakers
Również dla Community Distributed Design DS5: Instalacja i obsługa Konserwacja Instrukcja obsługi (12 strony)
Drukuj stronę
Infin-A-Ball™ Mounting System
Community's Infin-A-Ball™ (IAB) mounting
system allows low-profile mounting and precise
aiming over a broad tilt–swivel range. The IAB
ball-mount receptacle is factory pre-attached to
a recess in the cabinet, and after placing the
loudspeaker onto the IAB bracket, you need
only to twist the included hex wrench to lock any
position. The IAB bracket has factory-installed
internal wiring with an internal 4-pole Euroblock
connector in its base (for neat loop-through
connections) and a 2-pole male Euroblock plug
near the ball end for connection to the cabinet.
An IP56 wiring cover is also pre-installed,
providing snap-on weather-resistant protection.
Actual clamping screw
pressed against ball end
of IAB bracket.
Distributed Design Series
Surface Mount Loudspeakers
Loosen clamp using provided hex wrench,
rotate loudspeaker cabinet to desired position,
Installation and Operation Manual
then tighten clamp to lock
Page 6