ATIK Cameras 383L+ Podręcznik użytkownika - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Aparat cyfrowy ATIK Cameras 383L+. ATIK Cameras 383L+ 9 stron. Atik 383l+ camera user manual
Również dla ATIK Cameras 383L+: Podręcznik użytkownika (9 strony), Skrócona instrukcja obsługi (20 strony)
Drukuj stronę3.9 Replacing the desiccant
Your camera includes a high-performance molecular sieve desiccant tablet which is used to
avoid condensation in the CCD chamber. Although this desiccant will last a long time it may
eventually need replacement or recharging, in which case please follow the instructions
below:
- To replace the desiccant, open the desiccant port with the supplied plastic
tool and a screwdriver and take out the used tablet.
- To recharge the desiccant, place the tablet in an electric oven at 200ºC for 90
minutes. Take the tablet out the oven (CAUTION: tablet will be very hot) and
allow it to cool down.
- Place the recharged tablet back in the camera, replace the port cover and
tighten (no need to over- tighten). Wait 24 hours before connecting the camera
again.
Some versions of the 383L+ have a filter inside the desiccant chamber. The purpose of this
is to avoid contamination of the chamber when the desiccant is being replaced. The filter
is very fragile and should not be touched.
4. Technical Information
Image sensor
Resolution
Pixel size (um)
ADC
Readout noise (Typ.)
Cooling Delta
Regulated cooler
Water assist
Maximum exposure
Minimum exposure
Maximum Frame Rate
PC Interface
Power requirements
Backfocus distance
Thread on front
Weight
Mono or OSC
Page 7
383L+
Kodak KAF-8300
3362x2504
5,4x5,4
16 bit
7e
-40
Yes
No
Unlimited
0,2s
N/A
USB2
12VDC, 2A
17mm ±0.5
M42x0,75
700g
Either