Anderson LeakTrac Wireless 2400 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt testowy Anderson LeakTrac Wireless 2400. Anderson LeakTrac Wireless 2400 16 stron.

LeakTrac 2400 Component List:

The LeakTrac 2400 consists of 7 components all of which are contained in a

foam lined plastic carrying case.

Signal

Processing Unit

Probe

Power Booster

Ground Cable

Input Float

Headphones

The Signal Processing Unit (SPU)

This is the "brains" of the system, it converts input from the sensor probe into the

audible clicking sound used for leak finding. An adjustable strap allows this to be

worn around the operator's neck.

Touch pad buttons and LED indicators offer the following user interface:

SENSITIVITY Use the up arrow button to toggle through three different input am-

plification settings. Current setting will be indicated with led lights. HIGH amplifi-

cation is generally used for long distance leak detecting in order to find the gen-

eral area of the leak. MID and LOW setting are used for pinpointing the leak once

a general area is determined.

CLICK RATE Use the up and down arrows to adjust the base click rate. The unit

will return to a pre-set click rate each time it is turned off.

TRAC Indicator lights when the probe is aligned with current flow in pool.

LOW BAT Indicator lights when batteries should be replaced.

2885 Country Drive #190 · St. Paul, MN 55117 · 800-348-1316 · www.leaktools.com