Community dSPEC Instrukcja Connect Trobleshooting - Strona 18

Przeglądaj online lub pobierz pdf Instrukcja Connect Trobleshooting dla Sprzęt nagrywający Community dSPEC. Community dSPEC 20 stron.

Firewall Settings

Resyn works best with Windows Firewall. Simply install Resyn and it will automatically configure Windows

Firewall for dSPEC connections.

If another firewall is used, which is not recommended, it must be set up to allow Resyn to communicate with

dSPEC. It is generally easiest to grant access in broad strokes, i.e. grant Resyn full network access for both outbound

and inbound rules. If there are stringent security requirements individual TCP and UDP rules can be set up per the

following table.

Table 3 Specific Firewall Rules for Resyn Computer

Proto

Outbound Rules

col

TCP

Allow Ports 20, 21, 23, 3400, and 1024 through 65523

Allow outbound connections

UDP

Allow Port 3400

Allow IPv4 Broadcast

Optional: Allow IPv4 Multicast to 239.255.1.1

It is generally best to configure the Resyn Computer to always stay on because if the computer hibernates or goes

to sleep dSPEC connections will be closed. On Windows Vista or Windows 7/8, click the Start button

powercfg.cpl then <Enter>; on Windows XP click Start, click Run, type powercfg.cpl then <Enter>. Follow instructions

on screen to choose a power scheme or plan such as High Performance or Always On. The important point is to

ensure the plan settings are set such that computer is never automatically put to sleep.

Inbound Rules

Allow Ports 1024 through 65535

, type

| 18

P a g e