Community dSPEC Instrukcja Connect Trobleshooting - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja Connect Trobleshooting dla Sprzęt nagrywający Community dSPEC. Community dSPEC 20 stron.
Drukuj stronędSPEC and Resyn Network Overview
Resyn and dSPEC support various IPv4 network configurations. By default, Resyn and dSPEC support automatic IP
addressing as do most computers. Sometimes static IP addresses for dSPEC are preferred or required. Refer to
Address Tips
on page 4 for help on choosing automatic or static IP addresses for dSPEC.
There are various methods for connecting a computer running Resyn to dSPEC:
Direct
Automatic IP is
preferred.
Static IP can work too.
Continue
Troubleshooting
Connections
on page 5.
Indirect
Automatic IP is
preferred.
Static IP can work too.
Continue
Troubleshooting
Connections
on page 5.
Remote
Automatic IP will not
work.
Static IP is required.
For help with setting up
or troubleshooting
remote connections
please refer to the
Remote Management
Manual
via the Resyn
Help
menu.
The computer running Resyn is connected directly to dSPEC with one Ethernet
cable.
The computer running Resyn is connected either wirelessly or via an Ethernet cable
to one or more dSPECs via a common Ethernet switch. Each dSPEC is connected with
its own Ethernet cable.
The computer running Resyn is connected to one or more dSPECs through a TCP/IP
router to a remote location accessible via the Internet.
P a g e
| 3
IP