Community dSPEC Instrukcja Connect Trobleshooting - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja Connect Trobleshooting dla Sprzęt nagrywający Community dSPEC. Community dSPEC 20 stron.

Suggested Steps for Troubleshooting

This section explains steps to try to resolve common problems that may arise when attempting to connect Resyn

to dSPEC.

Resyn and dSPEC transfer settings as part of the connect process, settings remain synchronized while connected,

and dSPEC remembers those settings after disconnect and power cycle. The direction that settings are transferred

during connect differ between:

Table 2 Audio Settings Transferred During Connect

Connect Choice

* Within Resyn a Virtual dSPEC is a graphic representation of an Actual dSPEC. A Virtual dSPEC has all of the same

audio settings as an Actual dSPEC. A Virtual dSPEC can be defined and configured without having Actual dSPEC

hardware present. Upon connection, a Virtual dSPEC is paired with an Actual dSPEC. After the settings are transferred

the two become one.

Open Resyn. Choose

Connect | Load from dSPEC(s)

Connect | Load from

dSPEC(s).

and

Connect | Store to

Settings Transferred

Settings in the Actual dSPEC(s) replace settings on

*Virtual dSPEC(s) defined in Resyn.

Continue with

transferred the two

Load and

Connect.

Settings in *Virtual dSPEC(s) defined in Resyn

replace settings on Actual dSPEC(s).

Continue with

Store and

Connect on page 9.

dSPEC(s).

become one.

| 7

P a g e