ANDERSON-NEGELE MPI-200 Informacje o produkcie - Strona 5

Przeglądaj online lub pobierz pdf Informacje o produkcie dla Adapter ANDERSON-NEGELE MPI-200. ANDERSON-NEGELE MPI-200 8 stron. Programming adapter

Setting a parameter

1st step

· Select the parameter in the path (e.g. Language)

· As soon as the parameter is selected, it automatically appears in line 1 of the

parameter fi eld

· The current setting is displayed in line 2 (e.g. German)

2nd step

· Press the button

· The left area of the main menu (user interface) becomes inactive. This is indi-

cated by the inactive displayed navigation path and the active buttons in the

right area. All of the following settings are made in the right area:

3rd step

Set the desired parameter value The following options are available:

a: Manual entry

Parameters that can only be set to ﬁ xed values: By pressing the arrow

buttons.

Only values that are

greater than the cur-

rently displayed value

are possible

b: Accepting a system suggestion

Parameters that are set directly via the application: by accepting a system suggestion.

(e.g. level switch, a tank is fi lled to a certain height.)

The current process value of 6.14 mA

Advice

A change in the parameter value has an immediate eﬀ ect on the corresponding sensor function. If the changed param-

eter value is to be retained permanently, close the change mode using the "Save parameter" button. Leaving the menu

with the "Discard parameter" button resets the parameter to its value before the change.

Only values less than

the currently displayed

value are possible

"System suggestion"

Values greater than or

less than the currently

displayed value are

possible

Press the

button

C O N T R O L S

MPI-200 user interface

Function of arrow buttons

Fine

setting

is now defi ned as 4 mA

Coarse

setting