DREAMS Seoul Sleepmotion 200i Instrukcja obsługi - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wyposażenie wnętrz DREAMS Seoul Sleepmotion 200i. DREAMS Seoul Sleepmotion 200i 14 stron. Split unit
Również dla DREAMS Seoul Sleepmotion 200i: Podręcznik (16 strony), Instrukcja montażu (20 strony), Instrukcja obsługi (18 strony)
Drukuj stronęTV BED SAFETY INFORMATION
GENERAL INFORMATION
It is very important not to place any vessel containing liquids, e.g. drinks or vase of flowers, on top of the TV footboard
which may accidentally spill and enter the TV compartment as this could cause damage to the TV and/or the TV lifting
equipment.
If this happens, please contact Customer Services - ring 0344 292 00 00.
Do not expose the bed to an undue level of heat - keep away from radiators.
Never allow anyone to sit on the foot end of the bed - keep children well away from moving parts.
To keep the bed clean, we recommend that it be wiped over with a slightly dampened cloth or if fabric use a light vacuum
cleaner; disconnect power before cleaning.
Supplied with the TV bed is a remote control to operate the TV Lift and when you fit your own TV there is a remote control
to operate that as well. Both these remotes use batteries - there may be batteries in the Sleepmotion remote control too,
please check the user guide supplied with the bed.
There are strict controls for disposal of batteries - your local council can advise on how to safely dispose of them.
Never burn batteries on an open fire as they could explode.
IMPORTANT POWER INFORMATION
It is essential that the Mains Power Lead (4) is connected to an earthed socket be it a wall socket or extension lead -
otherwise there is risk of damage or even electric-shock.
The socket providing the power must be accessible at all times in case you need to switch off the power quickly.
During an electrical or lightening storm - disconnect the power completely as a precaution.
Always un-plug the power when going on holiday or when the bed is not used for an extended period.
If you have young children in the home always disconnect the power at the wall socket for extra safety.
Power outlets, extension leads or adapters must not be overloaded beyond their limit - this can result in fire or electric
shock. Leads supplied with this bed, or other approved mains powered extension leads used to power the equipment, must
not be placed where they can be walked on - this is dangerous and could lead to accidents.
Do not interfere with or modify any cables already fitted and do not add any extra media leads unless they are routed
through the ducts as shown in Stage 8. All leads must be tightly connected to back of TV, never hanging loose.
Never touch moving parts or any part of the equipment - if something needs to be checked, disconnect the power first.
Do not insert anything into the footboard as this could seriously damage the TV and/or the TV lifting equipment and could, if
done carelessly, cause serious damage or injury.
If the equipment doesn't operate normally or if there is an unusual noise, disconnect the power.
IMPORTANT: Care should be taken when connecting electrical items. If you are in any doubt about the
connections please consult an approved electrician.
TELEVISION INSTALLATION
Please follow the television installation instructions below.
Raise the TV Lift by pressing the Top button of the remote control.
Connect the Aerial & HDMI cable (5&6) by passing down the appropriate duct - see Stage 8.
Connect the TV to the mounting bracket as in Stage 9 or 10, as appropriate.
If necessary mounting bracket can easily be adjusted up or down to align with upper fixing holes on rear of TV.
Connect the TV Power Lead (supplied with TV) by passing plug down one of the ducts, plugging it into the adapter
then into the TV power socket which is on the face of footboard - see Stage 12. This socket is only to be used for the
TV as the supply is not constant.
If required, connect your own media cables through either of the ducts - connect your media equipment when ready.
Please use the cable clips & cable ties to make certain there are no loose wires to snag
The TV can now be operated following the TV Operation Guide supplied with your TV.
When finished viewing, lower the TV back into the footboard by pressing Down button of the remote control.
The TV will retract into the footboard automatically - power shall be turned off when TV reaches the bottom.
When the Up button is pressed - the TV Lifting Column rises and power to the TV turns back on automatically.
TROUBLE SHOOTING
If your equipment does not operate please check all the power connections to the wall and to the socket in the
footboard.
Make sure TV is switched on. (Note: TV will only work when it is in the up position).
If you cannot resolve an issue or still have a problem or need help, please contact Customer Services for advice.
Page 13 of 13