DREAMS Yardley Single Ottoman Instrukcja montażu - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz DREAMS Yardley Single Ottoman. DREAMS Yardley Single Ottoman 7 stron.

Bed Frame Assembly

Put the slat frame on the lift mechanism, use three sets of bolts (E), flat washers (J) and nuts (H) to loosely fit the

slat frame to the first four holes on each side of the lift nearest to the headboard, finger tight.

Bolts (M8x45)

Lift up the slat frame, use the locking nut (G) to fit the pistons to the lift mechanism.

Note: A small gap is left so stem can move freely. This is normal, See the sketch.

Nuts (M8)

x 4

Do not fully tighten all the bolts before

confirming the metal frame is in correct

position. Frame must be in the center

of bed in length & width.

x 8

Nuts (M8)

x 8

Flat Washers (M8x20)

Lift up the slat frame by one person with two hands.

Another one assemble the gas lift with nuts.

Don't over tighten, a small gap is left so stem can

move freely.

Page 5 of 7

x 16

Spanner (M8)

SMALL GAP

x 1