Caroma G Series Instrukcja instalacji i konserwacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji i konserwacji dla Produkt hydrauliczny Caroma G Series. Caroma G Series 16 stron. Electronic soap dispenser
Również dla Caroma G Series: Instrukcja instalacji i konserwacji (16 strony), Instrukcja instalacji i konserwacji (16 strony), Instrukcja instalacji i konserwacji (17 strony)

sETTINGs ADjusTMENT

DETEcTion ranGE: the sensor range is the greatest distance

that an object can be away from the sensor to activate the mixer

or tap. the sensor is factory preset.

to adjust the sensor range press + to increase detection range

and – to decrease the detection range of the sensor.

SEcuriTy TiME: the Security time, prevents continuous flushing

of water due to reflections or vandalism. By default, if the sensor

is covered for more than 90 seconds the water flow will shut

automatically. to resume regular operation any obstruction must be

removed.

Press the SEc button. Wait until a quick flashing of the red light of the

sensor eye is perceived. then, press + to increase the security time

and – to reduce it.

DElay in TiME: It is recommended to change the delay in time for

flush valves for urinals or toilets only.

If required, the delay in time can be modified also in mixer or tap as

follows: Press the In button. Wait until a quick flashing of the red light

of the sensor eye is perceived. then, press + to increase the delay in

time and – to reduce it.

DElay ouT TiME: this button allows modifying the water flow time

after the user removes his hands from the mixer or tap. a delay out

time close to 0 will save more water. an increased delay out time will

make the user experience more comfortable.

If required, the delay out time can be modified as follows:

Press the oUt button. Wait until a quick flashing of the red light of the

sensor eye is perceived. then, press + to increase the delay out time

and – to reduce it.

24 Hour HyGiEnE FluSH: If you have a compatible model with a 24

hours hygiene flush it is possible to enable and disable it .

to activate the hygiene flush, press the clock button. Wait until a

quick flashing of the red light of the sensor eye is perceived. then

press + to activate the hygiene flush or – to deactivate it.