Caroma Invisi Series II Podręcznik - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik dla Toalety Caroma Invisi Series II. Caroma Invisi Series II 16 stron. Urinal concealed cistern
Również dla Caroma Invisi Series II: Instrukcja instalacji (20 strony)
Drukuj stronę
1
Check
Installation
Requirements
237 060
- Invisi II 4.8/3L Dual Flush Tank
237 061
- Invisi II 4.8/3L Dual Flush Tank - with Standard Wall Hung Bowl Bracket
237 062
- Invisi II 4.8/3L Dual Flush Tank - with Under Counter Wall Hung Bowl Bracket
3
2
Select
Tank Service
Access Options
CONTENTS
• Invisi II - 4.8/3L Concealed Tank
• Mounting Brackets
• Tall Flush Pipe
• 19.7"/0.5m of Pneumatic Tube
• Tank Fixing Pack
• Brass Water Supply Fitting
CONTENTS
• Invisi II - 4.8/3L Concealed Tank
• Mounting Brackets
• Inwall, Wall Hung Bowl Bracket
• Tall Flush Pipe
• 19.7"/0.5m of Pneumatic Tube
• 3.5"/90mm Waste Pipe
• Bowl Bracket Fixing Pack
• Brass Water Supply Fitting
CONTENTS
• Invisi II - 4.8/3L Concealed Tank
• Mounting Brackets
• Under Counter, Wall Hung Bowl
Bracket
• Short Flush Pipe
• 19.7"/0.5m of Pneumatic Tube
• 3.5"/90mm Waste Pipe
• Bowl Bracket Fixing Pack
• Brass Water Supply Fitting
3 4
Select
Button Service
Access Options
INVISI
5 Step Easy Install
Installing
the Tank
Installation Requirements
REQUIREMENTS
• 3.5"/90mm Min. Inwall Cavity Depth
• 15.75"/400mm Min. - 16.5"/420mm Max
Cavity Width (e.g. between studs)
• 15/16" - 14NS-1 Water Connection
supplied with adaptor to ½" Copper solder
or FIP
REQUIREMENTS
• 3.5"/90mm Min. Inwall Cavity Depth
• 15.75"/400mm Min. - 16.5"/420mm Max
Cavity Width (e.g. between studs)
• 15/16" - 14NS-1 Water Connection
supplied with adaptor to ½" Copper solder
or FIP
NOTE: Non-compressible material
must be installed behind the bowl.
REQUIREMENTS
• 33.5"/850mm Min. Height to under counter
• 3.5"/90mm Min. (Front Mount Button
Panel) 3.9"/100mm Min. (Top Mount Button
Panel) Inwall Cavity Depth
• 15.75"/400mm Min - 16.5"/420mm Max
Cavity Width (e.g. between studs)
• 15/16" - 14NS-1 Water Connection
supplied with adaptor to ½" Copper solder
or FIP
™
SERIES II
5
Preparation
for Fitout