Comnet netwave NW3 Skrócona instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Router sieciowy Comnet netwave NW3. Comnet netwave NW3 8 stron.

Quick start user Guide

FIGURE 3 – poLE MoUNt INstRUctIoNs

tech suPPort: 1.888.678.9427

step 1.

unpack the two (2) cable ties from the box.

step 2.

loop each cable tie through the mounting bracket hole at the

top and bottom. Wrap them around the pole and tighten the

cable ties to secure the unit to the pole.

step 3.

Connect one end of an rJ-45 ethernet cable to the laN out

port of the power Injection module (pIm) and the other end to

laN of the access point.

maximum length of the rJ-45 Cat5 cable is 100meters.*

* Up to 200mW radio. For higher power radio upgrade to higher rating

power adapter.

step 4.

Connect the rJ-45 ethernet cable attached to the pIm to a

network device, such as to a switch of to the pC you will use to

configure the access point.

Connect the power adaptor to the main electrical supply and

the power plug into the socket of the pIm.

poe power input: passive poe (range 12V - 24V dC)

NW3/NW4

INS_NW3_NW4_QS_REV– 04/23/13 PAGE 3