Comnet CopperLine CLFE8IPS Instrukcja instalacji i obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Przełącznik Comnet CopperLine CLFE8IPS. Comnet CopperLine CLFE8IPS 19 stron. High-power poe mid-span injector
Drukuj stronę
INSTALLATION AND OPERATION MANUAL
INSTALLATION
Connect the unit to the included AC Power Adapter and plug into grounded power outlet.
Port 2
Port 1
Output
Insert the network cable from the head end devices into Ethernet ports marked "Input"
Input
Port 2
Port 1
Insert Network cable from PoE device into Ethernet ports marked "output." the data from Input 1 will be
Output
delivered through the corresponding output 1, and so on.
Input
Confirm PoE device operation
FIGURE 3 – POWER LED INDICATORS
POWER
RED
Power is on
OFF
Power is off
FIGURE 5 – POSSIBLE ETHERNET CONFIGURATION
Multiple Configurations are possible. Consult ComNet Design Center.
CopperLine Managed High Power Midspan
NVR
Switch
CNGE2FE24MS
Tech SupporT: 1.888.678.9427
Port 3
Port 4
Port 3
Port 4
CLFE1UTP
CLFE16IPS
CLFE1UTP
Port 6
Port 7
Port 5
Port 6
Port 7
Port 5
FIGURE 4 – ETHERNET LED INDICATORS
TRAFFIC (Standard)
GREEN
Flashing – Connection is
oK with traffic
YELLOW
–
OFF
No connection
≤3,000ft (914m) Cat-5
≤5,000ft (1524m) Coax
CLFE(X)IPS
Port 8
Port 8
Link
–
Connection is oK
No connection
data + Power
CLFE1UTP
data +Power
CLFE1UTP
INS_CLFE(X)IPS_REV–
12/15/11
PoE Camera
PoE Camera
PAGE 3