Comnet FVR8014 Instrukcja instalacji i obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Nadajnik Comnet FVR8014. Comnet FVR8014 6 stron. 8-channel 10-bit digitally encoded video + 4 bi-directional data channels
Drukuj stronęINSTALLATION AND OPERATION MANUAL
FIGURE 7 – DATA CONNECTIONS
See Page 4 for Switch Settings
Customer
Equipment
Data Transmit
RS232
Data Receive
Signal Ground
Data Out (+)
Data Out (-)
RS422
Data In (+)
Data In (-)
Data In (+)
Bi-phase or
Manchester
Data In (-)
Data (A)
2-Wire
RS485,
Data (B)
Sensornet
Data Out (A)
Data Out (B)
4-Wire
RS485
Data In (A)
Data In (B)
FIGURE 8 – LED INDICATORS
LINK
GREEN
Communication link has
been established over
optical fiber
RED
Communication link has
not been established.
OFF
Not powered up correctly –
TECH SUPPORT: 1.888.678.9427
FVT8014
DIN(-)
DOUT(-)
GND
DIN(+)
DIN(-)
DOUT(+)
DOUT(-)
DOUT(+)
DOUT(-)
DIN(+)
DIN(-)
DIN(+)
DIN(-)
DOUT(+)
DOUT(-)
VIDEO
DATA
An active video signal is An active data signal is
present on the BNC
present on the input pins
connector.
of the data connector.
No video signal
–
No data signal
Customer
Equipment
FVR8014
DOUT(-)
Data Receive
Data Transmit
DIN(-)
GND
Signal Ground
DOUT(+)
Data In (+)
DOUT(-)
Data In (-)
Data Out (+)
DIN(+)
DIN(-)
Data Out (-)
Data Out (+)
DIN(+)
Data Out (-)
DIN(-)
DIN(+)
Data (A)
Data (B)
DIN(-)
Data In (A)
DOUT(+)
DOUT(-)
Data In (B)
Data Out (A)
DIN(+)
Data Out (B)
DIN(-)
POWER
Unit powered up
–
Unit powered down
FVT/FVR8014
INS_FVT/FVR8014_REV–
05/10/10
PAGE 5