Comnet CLFE1UTP Instrukcja instalacji i obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Przedłużacz Comnet CLFE1UTP. Comnet CLFE1UTP 9 stron. Ethernet-over-utp/twisted pair extender with pass-through poe

Drukuj stronę

MEChANICAL INSTALLATION INSTRUCTIONS

• Read and keep these directions.

• heed all warnings.

• Follow all instructions.

• do not use this apparatus near water.

• Clean only with a dry cloth.

• Install in accordance with the manufacturer's instructions.

• This installation should be made by a qualified service person and should

conform to all local codes.

• DO NOT bundle UTP or Coax signals in the same conduit as high-voltage

wiring.

• To reduce the risk of fire or electrical shock, do not expose these products

to rain, moisture, dripping or splashing.

• No objects filled with liquids, such as vases, shall be placed on the

equipment.

• DO NOT install the unit in a place where the operating ambient

temperature exceeds 75ºC.

• Make sure that the external power supply output voltage is in the

recommended range.

• Do not install near any heat sources such as radiators, heat registers, stoves

or other apparatus (including dVRs) that produce heat.

• Protect the power cord from being walked on or pinched, particularly at

the power source, convenience receptacles and the point where they exit

from the apparatus.

• only use attachments/accessories specified by the manufacturer.

• Unplug this apparatus during lightning storms or when unused for long

periods of time.

• Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as when a power

supply cord or plug is damaged, liquid has been spilled, objects have

fallen inside the apparatus, the apparatus has been exposed to rain or

moisture, do not operate normally or has been dropped.

• The main plus is used as the disconnect device and shall remain readily

operable.

WARNING: To reduce the risk of fire or electric shock, do not expose this

WARNING: This apparatus is a Class I product. This product must be

WARNING: The mains plug is used as the disconnect device and shall

WARNING: For non-PoE applications, unit is to be connected to a mains

3 CORPORATE DRIVE | DANBURY, CT 06810 | USA

T: 203.796.5300 | F: 203.796.5303 | TECh SUPPORT: 1.888.678.9427 | [email protected]

8 TURNBERRY PARk ROAD | GILDERSOME | MORLEY | LEEDS, Uk LS27 7LE

T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | [email protected]

apparatus to rain or moisture. This apparatus shall not be

exposed to dripping or splashing and no objects filled with

liquids, such as vases shall be placed on the apparatus.

connected to a mains socket outlet through an AC to dC

power supply.

remain readily operable.

socket outlet through a Listed Class I power supply rated

12 VdC or 24 VAC.

INS_CLFEXUTP_REV–

09/28/11

PAGE 9