ATK 250LQ 1995 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Motocykl ATK 250LQ 1995. ATK 250LQ 1995 18 stron.

Drive chain adjustment:

The drive chain's adjustment should

be checked after each ride. With the

bike on a stand, push the bottom of

the chain up towards the lower end of

the chain rub pad. The chain should

become tight when approximately 1/32

inch away from the rub pad. If adjust

ment is required, loosen the rear axle

nut and adjust the chain tension by

turning the axle-adjuster screws. After

adjustment, retighten the adjuster

screw locknuts and the axle ﬁrmly.

Chain alignment is also very important

to long chain and sprocket life. While

on a stand, place a screwdriver shaft

between the upper part of the chain

and the rear sprocket, then turn the

rear tire slowly rearward until the top

of the chain becomes taut. Sight down

the top of the chain. It should appear

straight. If it looks curved, make the

necessary corrections using the

adjuster screws and recheck the

adjustment and axle nut tightness.

Clutch lever:

The clutch lever should be adjusted to

provide 1/4 inch of freeplay at its ball-

end.

Front brake lever:

The front brake level is provided with

an adjuster on its front side that allows

ATK 1995 Owner's Manual