Drehmo i-matic Instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Adapter Drehmo i-matic. Drehmo i-matic 20 stron. Electrical actuator with integral controls
Również dla Drehmo i-matic: Instrukcja instalacji i obsługi (18 strony)
Drukuj stronę- 1. Connection on Matic C Base Plate DMC - 02 (Since Hw Rev. 5)
- 2. Connection on I-Matic Interface Unit DIM - 09 (Devicenet)
- 3. Connection on Matic C Display Unit DMC - 30 (Lcd Display Unit)
- 4. Connection on I-Matic Display Unit DIM - 02 (Ir / Irii)
- 5. Connection on I-Matic Interface Unit DIM - 17 (Modbus Loop)
3.1.2 Connection on Matic C interface unit DMC - 14 (Profibus DP-V1)
The following picture shows the position of the interface connector for the SER01 adaptor on
the DMC - 14 unit.
3.1.3 Connection on i-matic interface unit DiM - 09 (DeviceNet)
The following picture shows the position of the interface connector for the SER01 adaptor on
the DiM - 09 unit. In case of redundancy, two connectors are available (one for each
channel).
DREHMO
Instruction manual for USB adaptor kit
page 12 of 20