Comnet FDX50M2 Instrukcja instalacji mechanicznej - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja instalacji mechanicznej dla Transceiver Comnet FDX50M2. Comnet FDX50M2 3 stron.
Drukuj stronęINSTALLATION INSTRUCTIONS
Communication Networks
3 Corporate Drive • Danbury, CT 06810 • USA
Tel: 203-796-5300 • Toll Free: 1-888-678-9427
www.comnet.net
LEDS:
RED = "No Activity"
GRN = "Activity"
NOTE:
RED DOES NOT MEAN "Error"
Power Sources - The product should only be operated from the recommended power source.
Use only a UL Class 2 indoor/dry or Class 3 outdoor/wet power supply.
WARNING: Unit is to be used with a Listed Class 2 or LPS power supply rated 9-12 VDC @ 1A.
WARNING: This unit should be installed in a restricted access location; available through the use
of a lock and key or other means of security. Access should be limited to service personnel who
have been instructed about the reasons for the restrictions to the location. Any and all
precautions should be taken and controlled by the authority responsible for the location.
2 FIBER RS232/422 DATA LINK
2 MULTIMODE
OPTICAL FIBERS
BLACK WITH WHITE STRIPE
GND
}
+ OUT
RS422 OUT
- OUT
- IN
}
RS422 IN
+ IN
OUT
IN
FDX51M2
BLACK
GND
RS232
OUT
}
IN
INS_FDX51M2_REVA
01/27/09
Page 2