Comnet FDX72 1 Series Instrukcja instalacji i obsługi

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Transceiver Comnet FDX72 1 Series. Comnet FDX72 1 Series 6 stron. Multi-protocol rs232/422/485 data transceiver featuring linear drop-insert-repeat

Drukuj stronę

INSTALLATION AND OPERATION MANUAL

FDX72(M,S)1

multI-PRotocol RS232/422/485 DAtA tRANScEIVER

FEAtuRING lINEAR DRoP-INSERt-REPEAt

the comNet™ FDX72(m,S)1 series transceiver unit is a fully-digital transceiver

designed for implementing full RS232, RS422 or RS485 2 or 4-wire traffic

signalization/communications data networks of the highest possible reliability.

A network of FDX72 units, used with the comNet FDX70E(A,B)(m,S)1 series

products as end points, can support one full-duplex data channel or two half-

duplex data channels. these transceivers also feature data translation to convert

between data protocols. Full data re-clocking and regeneration permit an almost

unlimited number of transceiver/controller units to be used within the network.

these environmentally hardened transceivers are ideal for use in unconditioned

out-of-plant or roadside installations.

utilizing wave division multiplexing technology (WDm), only one optical fiber is

required between units

Bi-color (Red/Green) lED indicators are provided for rapidly ascertaining equipment

operating status. See Figure 8 on Page 5 for an explanation of lED indications.

these units are interchangeable between stand-alone or card-cage mount

configurations. See Figure A on Page 7 for mounting instructions.

See Figures 1 – 9 for complete installation details.

INS_FDX72_REV–

02/29/12

PAGE 1