Electrolux EGT7353NOK Podręcznik użytkownika - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Hob Electrolux EGT7353NOK. Electrolux EGT7353NOK 16 stron. 70cm wide gas on glass with 5 burners and individual cast iron supports.
Również dla Electrolux EGT7353NOK: Podręcznik użytkownika (20 strony), Podręcznik użytkownika (20 strony)
Drukuj stronę
4 electrolux
• Make sure pots are centrally positioned
on the rings and do not stick out over
edges of the cooking surface.
• Use only the accessories supplied with
the appliance.
• Do not install a flame diffuser on the
burner.
CARE AND CLEANING
Warning! Risk of damage to the
appliance.
• Clean regularly the appliance to prevent
the deterioration of the surface material.
• Do not use water spray and steam to
clean the appliance.
PRODUCT DESCRIPTION
COOKING SURFACE LAYOUT
1
2
3
CONTROL KNOBS
Symbol
DAILY USE
Warning! Refer to "Safety information"
chapter.
IGNITION OF THE BURNER
Warning! Be very careful when you
use open fire in kitchen environment.
Manufacturer decline any responsibility
in case misuse of the flame
Always light the burner before you put
cookware.
To light the burner:
4
5
6
Description
no gas supply / off
position
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
DISPOSAL
Warning! Risk of injury or suffocation.
• Contact your municipal authority for infor-
mation on how to discard the appliance
correctly.
• Disconnect the appliance from the mains
supply.
• Cut off the mains cable and discard it.
• Flat the external gas pipes.
Semi-rapid burner
1
Semi-rapid burner
2
Triple Crown burner
3
Semi-rapid burner
4
Auxiliary burner
5
Control knobs
6
Symbol
1. Turn the control knob counterclockwise
to the maximum position (
push it down.
2. Keep the control knob pushed for ap-
proximately 5 seconds; this will let ther-
mocouple to warm up. If not, the gas
supply will be interrupted.
3. Adjust the flame after it is regular.
If after some tries the burner does not
light, check if the crown and its cap are
in correct positions.
Description
ignition position /
maximum gas supply
minimum gas supply
) and