Andonstar AD409-Pro Podręcznik użytkownika - Strona 19

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Mikroskop Andonstar AD409-Pro. Andonstar AD409-Pro 20 stron.

Safety and Maintenance

1. Please keep the device in a clean and dry environment, away from oil, water, gas and other materials that

may cause corrosion. The product contains tiny parts and is not edible, please operate under the guidance of

guardians or teachers to avoid accidental ingestion.

2. When the image quality is poor, clean the lens with a dry, soft cloth.

3. Do not press hard or hit the display with sharp objects. To clean dust from the screen surface or case, wipe

with a dry and soft cloth. Never spray water or cleaners directly on the display.

Please check the circuit and power supply according to the installation instructions.

1. Why can't turn on the microscope normally？

Please adjust the LED light, object distance, and refocus. If you still can't get a clear image, please wipe the

2. Why can't I get a clear image？

lens gently with a clean cotton cloth etc.

After all settings are completed, long press the power button to shut down the device. The settings will not

3. Why can't I save the settings?

be saved if the power is turned off by the power cable or if the power is cut off directly.

4. Why is there a message of crash, memory card error or memory card full after inserting the TF

After inserting the TF card, please format it first. It is recommended to use a high-quality TF card with class

card?

10 and above specifications.

5. Why is the missing file prompted during the installation of measurement software or program

Please make sure that Microsoft.Net Framework 4.0 and Microsoft Visual C++ 2010 runtime have been

startup?

completely installed in the system.

6. The program has been installed correctly and can be opened and run normally, but why can't I

Please make sure the hardware is connected correctly, the camera option is shown on the display, and the

measure in the software？

"OK" button has been pressed.

If the image still cannot be displayed normally, please enter the device manager of the operating system,

delete the USB video device, unplug and replug the USB cable, and then click refresh to make the system

recognize it again. The video device name after successful identification is "USB Camera".

If you want to get more accurate results, you need to use a higher precision calibration scale for calibration,

7. Why is the measurement error so large?

and keep the same focal length and magnification as the calibration as much as possible when measuring.

Errors in the calibration scale, using the wrong calibration value, changing focal length and magnification,

wrong measurement method, and other factors can affect the accuracy of the measurement.