Bosch GSB 13 RE Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wiertarka Bosch GSB 13 RE. Bosch GSB 13 RE 13 stron. Cordless impact drill bosch gsb professional 13/ 13 re/ 16/ 16 re
Również dla Bosch GSB 13 RE: Instrukcja obsługi (18 strony), Oryginalna instrukcja (37 strony), Oryginalna instrukcja obsługi (12 strony), Instrukcja obsługi (19 strony), Oryginalna instrukcja obsługi (16 strony), Oryginalna instrukcja obsługi (9 strony)

Drukuj stronę

Safety instructions

WARNING! Read all instructions Failure to follow all in-

structions listed below may result in electric shock, fire

and/or serious injury. The term "power tool" in all of the

warnings listed below refers to your mains-operated

(corded) power tool or battery-operated (cordless) pow-

er tool.

SAVE THESE INSTRUCTIONS

1. Work area

a) Keep work area clean and well lit. Cluttered and poorly

lit areas can result in accidents.

b) Do not operate power tools in the presence of flam-

mable liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a

power tool. Distractions can cause you to lose control

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodified plugs and

matching outlets will reduce risk of electric shock

b) Avoid body contact with earthed or grounded surfaces

such as pipes, radiators and refrigerators. There is an

increased risk of electric shock if your body is earthed or

grounded.

c) Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of elec-

tric shock.

d) Do not misuse the cord. Never use the cord for carry-

ing, pulling or unplugging the power tool. Keep cord

away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric

shock.

e) When operating a power tool outdoors, use an exten-

sion cord suitable for outdoor use. Use of a cord suit-

able for outdoor use reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a po-

wer tool while if you are tired or under the influence of

drugs, alcohol or medication. A moment of inattention

while operating power tools may result in serious perso-

nal injury.

b) Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid safety

shoes, hard hat, or hearing protection used for appropri-

ate conditions will reduce personal injuries.

c) Avoid accidental starting. Ensure the switch is in the

off-position before plugging in. Carrying power tools

with your finger on the switch or plugging in power tools

that are switches on invite accidents.

d) Remove any adjusting key or wrench before switching

on the power tool. A wrench or a key left attached to a ro-

tating part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at

all times. This enables better control of the power tool in

unexpected situations.

f) Dress properly. Do not wear loose clothing or jewel-

lery. Keep your hair, clothing and gloves away from

moving parts. Loose clothes, jewellery or long hair can

be caught in moving parts.

g) If devices are provided for the connection of dust ex-

traction and collection facilities, ensure these are con-

nected and properly used. Use of these devices can re-

duce dust-related hazards.

h) Use ear protectors. Exposure to noise can cause hear-

ing loss.

4) Power tool use and care

a) Do not force the power tool. Use the correct power tool

for your application. The correct power tool will do the

job better and safer.

b) Do not use the power tool if the switch does not turn it

on and off. Any power tool that cannot be controlled with

the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the

battery pack from the power tool before making any

adjustments, changing accessories, or storing power

tools. Such preventive safety measures reduce the risk

of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool

or these instructions to operate the power tool. Power

tools can cause injuries in the hands of untrained users.

e) Maintain power tools. Check for misalignment or bind-

ing of moving parts, breakage of parts and any other

condition that may affect the power tools operation. If

damaged, have the power tool repaired before use. Ac-

cidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly main-

tained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in

accordance with these instructions and in the manner

intended for the particular type of power tool, taking

into account the working conditions and the work to

be performed. Use of the power tool for operations dif-

ferent from those intended could result in injuries.

5) Service

a) Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is main-

tained.