andover Model-One Instrukcja obsługi produktu - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi produktu dla Stojaki i stojaki andover Model-One. andover Model-One 19 stron. Modular stand system
Również dla andover Model-One: Instrukcja obsługi produktu (14 strony), Instrukcja obsługi produktu (8 strony)
Drukuj stronę
Room Placement
As with any sound system, placement in your room will affect how well the sound
fills the space. The Model One features a 270-degree sound field to provide a
spacious, room-enveloping performance that defies its compact size. Sound is
emitted from both sides and the front of the unit, so be careful not to block the
sound from the sides. Although placement of the Model One is less complex
than a typical component system, following these simple guidelines will result in
the most enjoyable sound quality.
•
To ensure the most even sound coverage, try to place system near the
center of one of the walls. It should be at, or slightly below, ear height for
a seated listener.
•
Using the Model One stand will place the system at the ideal height in
most rooms.
•
If the unit will be placed in a corner, angle it at 45-degrees so that the
speakers on one side are not blocked.
•
Keep the sides of the unit unobstructed by solid objects for as much
distance as practical, but by at least 12" (~30.5 cm).
•
Place the unit on a solid table or component rack. DO NOT use soft
vibration isolators or place the unit on a carpet or foam surface. If the
support surface is not sufficiently rigid, acoustic feedback may occur.
•
Avoid placing the unit in an enclosed bookshelf or cabinet as this will
significantly compromise its performance.
Page 7