Dremel 2200 Versaflame Instrukcja obsługi/bezpieczeństwa - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi/bezpieczeństwa dla Latarka Dremel 2200 Versaflame. Dremel 2200 Versaflame 10 stron.

Find Quality Products Online at:

Using an Open Flame

When configured for open flame, the

VersaFlame can be used for tasks such as

culinary caramelizing, copper pipe sweating,

and freeing of seized nuts and bolts.

To use the Dremel VersaFlame with an open

flame, remove the Flame Diffuser from the

Burner if installed.

Using with Soldering Tip

The Soldering Tip (to be used with the Flame

Diffuser) can be used for regular soldering

activities including joining wire and

component installation on printed circuit

boards.

Maintenance & Storage

Maintenance

Clean the exterior of the tool with a clean dry

cloth. If necessary, use a damp cloth.

When soldering, to clean the Soldering Tip,

wipe the tip on a wet sponge while it is still

hot and solder is molten.

Never clean the Soldering Tip with

sandpaper as this reduces its lifetime.

GlobalTestSupply

www.

Applications

Using the Blower

The Blower can be used for general area

heating and paint or coating removal.

Use with Deflector

The Deflector (to be used with the Blower)

can be used for shrinking of heat sensitive

insulation around electrical wiring and

heating of other heat sensitive materials.

Storage

Ensure that the Lock-On Button is in the

unlocked position and Trigger is locked out

with the Safety Lock.

Allow several minutes for torch to cool.

When torch is cool, store torch out of reach

of children.

-9-

.com