Compac Furniture BOS-TB105 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wyposażenie wnętrz Compac Furniture BOS-TB105. Compac Furniture BOS-TB105 14 stron.

BOSTON – BOS-TB105

STEP 5 –

rails to LH end



Lay the LH End finished side down on a clean clear surface. Fit the two Rails as shown below. The H1

Connecting Bolts installed in the End will fit into the H2 Large cams installed in the Rails.



Turn the Metal Cams installed in the Rails in a clockwise direction to lock the Rails to the End. Ensure

they turn a least a ¼ to ½ a turn.

STEP 6 –

RH END



Attach the RH End to the Rails by connecting the H1 Connecting Bolts installed in the RH End to the

H2 15mm Cams installed in the Rails as shown below.



Turn the Metal Cams installed in the Rails in a clockwise direction to lock the Rails to the End. Ensure

they turn a least a ¼ to ½ a turn.

For assembly advice or parts go to www.warehousefurniture.co.nz or call 0800 100 858

ASSEMBLE THE UNIT