Compac Furniture C104 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wyposażenie wnętrz Compac Furniture C104. Compac Furniture C104 16 stron. 4 drawer chest

STEP 5 –

rails to LH end

•

Lay the LH End finished side down on a clean clear surface. Fit the two Rails as shown below. The H1 Connecting Bolts

installed in the End will fit into the H2 Large cams installed in the Rails.

•

Turn the Metal Cams installed in the Rails in a clockwise direction to lock the Rails to the End. Ensure they turn a least a

¼ to ½ a turn.

STEP 6 –

RH END

•

Attach the RH End to the Rails by connecting the H1 Connecting Bolts installed in the RH End to the H2 15mm Cams

installed in the Rails as shown below.

•

Turn the Metal Cams installed in the Rails in a clockwise direction to lock the Rails to the End. Ensure they turn a least a

¼ to ½ a turn.

For assembly advice or parts go to www.compacfurniture.co.nz or call 0800 100 858

ASSEMBLE THE UNIT