Andover Controls EMX34/CK34 Instrukcja instalacji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt komputerowy Andover Controls EMX34/CK34. Andover Controls EMX34/CK34 12 stron. Cardkey interface board
Drukuj stronę4. Insert the top of the printed circuit board into the PCB bracket.
Attaching the PCB to Brackets
DIN
DIN Rail
End Clamp
5. Slide the other DIN Rail mounting bracket onto the remaining PCB bracket.
6. Slide the DIN Rail bracket and PCB bracket onto the DIN Rail, flat side last. Carefully
slide the assembled brackets onto the bottom of the printed circuit board until tight.
7. Slide another end clamp onto the DIN Rail. Position it up against the flat side of the
brackets.
8. Tighten the end clamp screws to secure.
Technical Manuals Online! - http://www.tech-man.com
Top of PCB
PCB Mounting Bracket
DIN Rail Mounting Bracket
EMX 34 Installation Guide
5