dreo DR-HTF007 Podręcznik użytkownika - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wentylator dreo DR-HTF007. dreo DR-HTF007 12 stron.
Drukuj stronę
ASSEMBLING
YOUR TOWER FAN
Assembly Instructions
When using the appliance for the first time, remove the wraps and attach the
parts by following the steps below.
1
Slots
Up
Down
Pegs
2
Press down on edges to click two
base halves together.
3
Fan
Dreo Tower
2
Keep two base halves in a
crossed position, then insert
pegs on one half onto the
slots on the other half.
3
Run the cord through the center
hole.
4
Fit the base onto the bottom of
the fan by aligning the arrows
on the underside.
6
Thread the cord through the REAR cord
keepers before putting the fan upright.
CAUTION
- Do not operate the tower fan if the base has not been installed.
- Make sure to thread the cord through all rear cord keepers.
5
Rotate the base clockwise to
lock in place.
4
Fan
Dreo Tower