Andrew ValuLine VHLP1-18-IT1B Instrukcje instalacji

Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Antena Andrew ValuLine VHLP1-18-IT1B. Andrew ValuLine VHLP1-18-IT1B 2 stron. Antennas siemens 0.3m 1ft & 0.6m 2ft

Drukuj stronę

Installation Instructions

0.3m(1ft) & 0.6m(2ft)

ValuLine

Antennas Siemens IT1B

Description

The installation, maintenance, or removal of antenna

systems requires qualified, experienced personnel.

Andrew installation instructions have been written for

such personnel.

Note:-

Remove protective blanking plate

and hardware prior to fitting radio.

(Plate hardware to be retained if

radio is required to be remote

mounted)

1ft version of Antenna shown

Vertically Polarized Application

Notice

Change of Polarization method

Loosen screws (6 places) until

transition can rotate freely

then rotate transition hub 90 deg.

untill it "locates" in timing recess.

When located, re-tighten to a

torque of 5Nm (3.69 lb-ft)

Horizontally Polarized Application

Bulletin 102217

Timing mark on

transition with timing

mark on mounting ring

(Vertical Polirization)

Transition hub

Timing mark on

transition to line up

with timing mark on

mounting ring

(Horizontal

Polarization)