Electrolux 316488521 Instrukcja instalacji, użytkowania i konserwacji - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja instalacji, użytkowania i konserwacji dla Okap wentylacyjny Electrolux 316488521. Electrolux 316488521 19 stron. 30” and 36” free-standing range hood

Drukuj stronę

Electrolux 316488521 Instrukcja instalacji, użytkowania i konserwacji

1. Filters

Special functions

Clock programming

Clock pr

ogramming

• The clock can be reprogrammed at any time except during an active timed function.

• The clock can be displayed in a twelve hour format and valid clock times are from 1:00 to 12:59.

• The clock can be reprogrammed pressing the "T T T T T imer

adjusted with the "

" and "

• The user can have minute increments / decrements of 1 minute, but if the user keep pressing the "

" buttons for more than 1 second, the increments / decrements will be of 5 minutes.

During this option the control will round to the nearest 5 minutes.

• The user can finish on reprogramming the clock pressing the "T T T T T imer

• After 1 minute of no button pressed the control will accept the programmed clock time and will add one

minute to the set clock.

Grease filter saturation alarm

ease filter saturation alarm

• After thirty fan functional hours, the display will show "Gr

When this icon is shown in the display, the grease filters installed are required to be washed.

• To reset the grease filter saturation alarm the user must press the "

action the icon "Gr

Gr Gr

Gr Grease filter

ease filter

ease filter" is not displayed, and the hood has the normal display operation.

ease filter

Char

coal filter saturation alarm (Recir

Char

Charcoal filter saturation alarm (Recir

Char

coal filter saturation alarm (Recirculating accessories)

coal filter saturation alarm (Recir

• After one hundred and twenty functional hours of the fan, the display will show "Char

is active. When this icon flashes on display, the charcoal filters installed are required to be replaced or

reactivated.

• To reset the charcoal filter saturation indication the user must press the "

this time the icon "Char

Char

Charcoal filter

Char

coal filter

coal filter" is not displayed and the hood has the normal display operation.

Audible signal activation and deactivation

• The audible signals can be activated or deactivated pressing the "Light

• If the audible signal is activated, a tone must sound and the "Snd

2 seconds.

• If the audible signal is deactivated, the "Snd

tone must sound.

Charcoal filter inclusion and exclusion (Recir

Char

coal filter inclusion and exclusion (Recirculating accessories)

coal filter inclusion and exclusion (Recir

Char

coal filter inclusion and exclusion (Recir

• The charcoal filter inclusion or exclusion can be set by pressing the "

time for 5 seconds.

• The Inclusion or exclusion of charcoal filter must be selected while the lamps and the motor are OFF.

• When the charcoal filter has been excluded, the charcoal filter alarm is disabled.

Heat sensor

• The control is equipped with a heat sensor that will turn on the blower at second speed if excessive heat

occurs (over 158° F

158° F

158° F or 70°C

70°C) surrounding the control area.

70°C

• If the blower is OFF or if it is operating at first speed, the blower will be set automatically to second speed,

the display shows the word "CArE

• During this state, the user may raise the blower speed to third speed but can not decrease the speed.

• When the temperature level on the hood drops to normal, the blower will operate in the setting defined by

the user before the alarm occured.

Control buttons - Special functions

imer

imer" button for 5 seconds, and after, the clock can be

" buttons. Colon ":" will flash indicating clock programming mode.

Gr Gr

Gr Grease Filter

culating accessories)

Snd

Snd" symbol must appear on the display for 2 seconds and no

CArE

CArE" to indicate that heat sensor has detected an excessive heat.

CArE

imer

imer" button.

ease Filter" if the fan is active.

ease Filter

" button for 5 seconds, after this

Char

Charcoal Filter

Char

" button for 5 seconds, after

Light

Light" button for 5 seconds.

Light

Snd

Snd" symbol must appear on the display for

Snd

culating accessories)

" and "

" buttons at the same

coal Filter" if the fan

coal Filter