Electrolux 700 D Instrukcja obsługi i instalacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Okap wentylacyjny Electrolux 700 D. Electrolux 700 D 17 stron.

Maintenance and Care

• The hood must always be disconnected from the electricity

supply before beginning any maintenance work.

• The purpose of the grease filters is to absorb grease particles which

form during cooking and it must always be used, either in the

external extraction or internal re-circulation function.

Attention: the metal grease filters must be removed and washed,

either by hand or in the dishwasher, every four weeks.

The grease filter is inside the suction grill.

• Opening the inlet grill: Open the grill by turning the right-hand

closing mechanism clockwise and the one on the left anti-clockwise

Fig. 2

Attention! If removing the grill is difficult check that the drawer has

been completely opened.

• Remove the filter holder and extract the grease filter. Fig. 3

Hand washing

Soak grease filters for about one hour in hot water with a grease-

loosening cleaner, then rinse off thoroughly with hot water. Repeat

the process if necessary. Refit the grease filters when they are dry.

Dishwasher

Place grease filters in the dishwasher. Select most powerful washing

programme and highest temperature, at least 65°C. Repeat the

process. Refit the grease filters when they are dry.

When washing the metal grease filter in the dishwasher a slight

discolouration of the filter can occur, this does not have any impact

on its performance.

• Clean the inner housing using a hand hot solution only(never use

caustic detergents, abrasive powders or brushes).

Fig. 2

Fig. 3