Andrew Alliance Andrew+ Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt laboratoryjny Andrew Alliance Andrew+. Andrew Alliance Andrew+ 4 stron.
Drukuj stronę
Unpacking Andrew+
Open the
cardboard
gently
Deploy the robotic arm
Remove the interme-
diate foam block
Equip each Andrew Alliance
electronic pipette with a pipette
Place them in any available slot
adaptor
of the tool stand
Remove power supply,
manuals, waste domino,
and cables then remove
Remove the two
the top foam-based
mid-adaptors
protection
click
Deploy the tool stand...
until you hear a clicking
sound...
Plug the provided adap-
ter to a power source,
then plug it to Andrew+
(located in the back of
the baseplate)
Keep your back straight
and use your legs to lift
Andrew+
Caution:
!
Andrew+ weights
16 kg / 35,3 lbs
DO NOT grab
!
Andrew+ from
Grab Andrew+ by the
its arms, doing so will
back of head and by the
cause irreversible
grip that you will find
damage to the unit
below the baseplate
click
and then an other one
Remove the plastic
sheeting of the hand
Now your Andrew+ is set up.
Place your Andrew+ on a steady table.
For moving the device, incline it gently
backward by pushing onto its nose in order
to grab the grip under the baseplate,
then lift Andrew+ and move.
Connect the Waste
Expand the silicone
waste and place
Domino by sliding it
it into the waste
inside the connec-
Domino
tor located in the
baseplate
Now please
connect Andrew+
to OneLab
please refer to the
Put intermediate and
next page
top foam back in the
"Getting started"
cardboard. Close it.
Please store if for main-
tenance need.