Bosch 2 Instrukcja obsługi i instrukcja instalacji - Strona 25

Drukuj stronę

Bosch 2 Instrukcja obsługi i instrukcja instalacji

Faults

Loud noises, vibrations

and machine "movement"

during the spin cycle.

Noises during spin and

drain cycles.

The display panel/indica-

tor lamps do not work

while the appliance is run-

ning.

There is detergent resi-

due on the laundry.

If you cannot rectify a fault yourself (after switching the machine off and on again) or a repair is required:

Set the programme selector to the Off position. The appliance is switched off.

■

Unplug the mains plug from the socket.

■

Turn off the tap and call the after-sales service..~ Page 25

■

After-sales service

If you cannot rectify the fault yourself

A f t e r - s a l e s s e r v i c e

(Faults – what to do? ~ Page 24),

please contact customer services. ~

Cover page

We will always find an appropriate

solution to avoid unnecessary visits by

engineers.

Please provide the after-sales service

with the product number (E no.) and the

production number (FD) of the

appliance.

Product number

Cause/remedy

Appliance aligned? Align the appliance. ~ Page 31

■

Are the appliance feet secured? Secure the appliance's feet. ~ Page 31

■

Have the transport braces been removed? Removing the transportation

■

bolts.

Clean the detergent solution pump ~ Page 21

■

Power failure?

■

Have the fuses blown? Switch on/replace the fuses.

■

If the fault occurs repeatedly, call the after-sales service. ~ Page 25

■

Some phosphate-free detergents contain water-insoluble residue.

■

Select the Rinse programme or brush the laundry after washing.

■

Production number

After-sales service

You can find this information (*

depending on the model):

On the inside of the washing machine

door*/in the opened service flap* and

on the rear of the appliance.

Trust the expertise of the

manufacturer.

sure that the repairs are carried out by

trained service personnel using genuine

spare parts.